FAQ
[Total:17, 1/1 Page]

 

No Title Name Date File Hit
17   If permanent magnetic motor operates at high temperature(100℃), efficiency of motor decreases. kturbo 13/03/20 168
16   Aluminum impeller is more advantageous for high rpm turbo blower. kturbo 13/03/20 106
15   Aluminum impeller is lighter than stainless impeller. kturbo 13/03/20 85
14   Gear driven turbo blower has higher loss of compression. kturbo 13/03/20 67
13   Blower using Magnetic Bearing is making more noise kturbo 13/03/20 91
12   Using commercialized inverter is more stable for high speed direct-drive turbo blower. kturbo 13/03/20 81
11   In case of power failure, magnetic bearing loses its function and damage occurs. kturbo 13/03/20 98
10   Magnetic bearing does not rpm limits. kturbo 13/03/20 87
9   Compressor is more stable if it is operate in low rpm. kturbo 13/03/20 77
8   There is no maintenance required other than filer for direct coupled turbo blower. kturbo 13/03/20 60
7   Life expectancy of Air Foil Bearing is unlimited because there is no contact between shaft and bearing. kturbo 13/03/20 91
6   Adiabatic efficiency of multi stage can be reached 83%. kturbo 13/03/20 58
5   Adiabatic efficiency of turbo blower with vaneless diffuser is approximately 84%. kturbo 13/03/20 56
4   Turbo Blower is adequate for medium or large size applications. kturbo 13/03/20 55
3   Performance can be guaranteed by using generalized performance map. kturbo 13/03/20 59
2   It is more reasonable to guarantee that guaranteed flow rate have ±5% surplus. kturbo 13/03/20 57
1   The system which compresses inlet air and heat generated from inverter and motor is more efficient because it does not discharge heat to outside. kturbo 13/03/20 82
◀Pre10[  1  ]Next10▶